Rotary Joint Sealing Surface Manufacturing Improvements

Date of Defense

4-20-2021

Date of Graduation

5-2021

Department

Mechanical and Aerospace Engineering

First Advisor

Judah Ari-Gur

Second Advisor

Richard Meyer

Abstract

Kadant Johnson LLC manufactures the model 3300SXB rotary sealing joint that links rotating machinery to a fixed pipe. The current manufacturing process of the 3300SXB body may result in a sealing surface with too much spherical variation. This leads to leaks and wear in the joint. The goal of this project was to isolate variables in the manufacturing process that impact the sealing surface and develop a solution to reduce their impact on the variability of the sealing surface. The variables investigated included the two machines used for production, TC11 and TC13, the quench-polish-quench (QPQ) surface treatment process, gripping of the part, and seal rings in the joint. The sealing surface was measured using a coordinate measurement machine (CMM) that recorded the deviations of 46 points from the nominal dimensions. These points were then compared to the baseline values of the current process. The statistical significance of each variable was determined using normality tests, 2-sample T-tests, and 2-sample variance tests. After analyzing all the factors, the machine type was found to be the only factor that significantly decreased the surface variability. This conclusion led to the recommendation that the newer machine, TC13, should be the primary machine used for the 3300SXB body manufacturing.

Comments

This thesis contains proprietary information and is not available. For more information please contact the author.

Access Setting

Honors Thesis-Open Access

This document is currently not available here.

Share

COinS